Featured
W6111 SMT Stencil Wiping Rolls
W6111 is the DEK-compatible roll: 510 mm wide, 10 m long, 20 mm core, two notches at each end. The 56 GSM cellulose/po...
The collection
Printer-specific SMT stencil wiping rolls and stencil cleaning cloths for DEK, SONY and MPM lines. Low-lint 56 GSM cellulose/polyester.
Also explore Wiping papers Disposable wood-pulp papers when a cloth is more than the job needs.
Featured
W6111 is the DEK-compatible roll: 510 mm wide, 10 m long, 20 mm core, two notches at each end. The 56 GSM cellulose/po...
W6102 is the MPM-compatible roll: 300 mm wide, 10 m long, 19.5 mm core, 12 internal ribs. The 56 GSM cellulose/polyest...
W6115 is the SONY-compatible roll: 260 mm wide, 20 m long, 20 mm core. The 56 GSM cellulose/polyester spunlace is perf...
W6120 is a 4-inch polyester cloth for SMT stencil and tool wipe-down. It is the hand-held companion to the printer rol...
Specifying smt stencil wiping rolls
SMT stencil wiping rolls are specified by core diameter, core length, notches and ribs before width or length. A roll that does not feed correctly is not a consumable problem; it is the wrong part number.
DEK, SONY and MPM printers use different cores and drive features. Two notches, 12 internal ribs or a plain core are not interchangeable. Match the printer model first.
The 55/45 cellulose/polyester spunlace is chosen for low lint and high wet strength under the squeegee. A heavier cloth can starve the stencil; a lighter one can tear.
Perforations and cold-cut edges keep the feed even. Check the roll width against the stencil aperture area, then confirm the length against the printer maintenance cycle.
Selection notes
Four questions that decide whether the cloth belongs in the room.
Cut edges are economical for industrial wipe-downs and ISO Class 7–8 support areas. Laser, ultrasonic or heat-sealed edges lock the fibers in and are the correct choice for ISO Class 3–6, optics, medical devices and any surface where a stray fiber becomes a defect.
Grams per square meter describes the fabric weight, which drives absorbency, wet strength and hand feel. A 65 GSM rayon/polyester is soft and precise; a 140–200 GSM polyester holds more liquid and survives repeat use. GSM is a starting point — construction and edge finish decide the rest.
Yes. Stock lines can be combined across sizes and formats, and custom runs can include more than one SKU. MOQ is negotiated per construction rather than per carton.
Both. Cleanroom wipers are converted and bagged in ISO Class 4–6 workshops with particle, NVR and ionic data. Universal and heavy-duty cloths are built for industrial soil load, where absorbency and wet strength matter more than particle counts.
Specification support
Send the surface, the contaminant and the cleanroom class. We will shortlist two formats, send samples and quote both.
Direct line
+86-755-8961-6773 info@wipestar.comRoom 101, Building 1, Angeer Factory, No.4 Hetian Road, Shatian Community, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China 518122