W6120 SMT Stencil Cleaning Cloth
Product codeW6120Made in Shenzhen
W6120 is a 4-inch polyester cloth for SMT stencil and tool wipe-down.
- Stock lines ship in 3–5 days; custom runs in 7–15 days.
- COA, SDS and lot test records supplied with the shipment.
- OEM sizes, folds, edges and private-label packaging available.
Need a specification match? Talk to a product specialist or call +86-755-8961-6773.
Overview
W6120 is a 4-inch polyester cloth for SMT stencil and tool wipe-down. It is the hand-held companion to the printer rolls, cut for squeegee, support and underside cleaning.
Use it for the hand-held steps around the printer: squeegee, supports and stencil edges. The roll does the automated underside cleaning.
Construction & performance
- 4-inch polyester cloth for stencil and tool wipe-down
- Low lint under the squeegee
- High wet strength with solvents
- Cut edge; pack format for SMT lines
Customization & sampling
Custom core dimensions, notches, ribs and roll lengths are available. Send the printer model and the current roll code; we will confirm fit and send a sample roll.
Series data
| Product code | W6120 |
|---|---|
| Series | SMT Stencil Wiping Rolls |
| Base material | Polyester |
| Cleanroom class | Electronics · ISO Class 5–7 |
| Edge finish | Cut edge |
| Format | 4 × 4 in |
| Color | White |
| Packaging | Perforated roll · per SKU |
| Certifications | ISO 9001 · ISO 14001 · SGS · RoHS |
| MOQ | Negotiable by construction |
| Lead time | 3–5 days stock · 7–15 days custom |
Range specification shown for orientation. The final configuration — weight, texture, size, edge and packaging — is confirmed on the product data sheet before production.
Construction notes
Polyester is the workhorse of cleanroom wiping: low particle release, good solvent resistance and enough strength to survive a folded, repeated pass. It wets out more slowly than cellulose but holds what it takes.
Performance depends on the edge and the wash. A sealed border removes the largest fiber source; a washed, low-NVR grade keeps residue off critical surfaces. Both are specified on the data sheet rather than assumed from the fiber name.
Typical applications
- Stencil underside cleaning
- Squeegee wipe-down
- PCB support cleaning
- DEK / SONY / MPM printers
- SMT tool maintenance
Documentation
Looking for the catalogue entry or to place an order? See W6120 SMT Stencil Cleaning Cloth on the official WIPESTAR catalogue . This page documents material, ISO class and edge options for specifiers.
Questions buyers ask
What is the W6120 used for?
W6120 SMT Stencil Cleaning Cloth is specified for surface wiping and similar work. It is a Polyester construction with a cut edge edge, supplied perforated roll · per sku. Confirm the format against your surface and solvent before the first order.
Does the W6120 suit an ISO Class 5 cleanroom?
The range is rated Electronics · ISO Class 5–7. The class on the data sheet refers to the wiper, not to the room: the room classification, the gowning and the wiping technique decide whether the cloth can be used there. For a critical zone, ask for the lot particle and NVR data for this grade.
Is the W6120 edge cut or sealed?
The edge is cut, which is the economical choice where the soil load dominates and particle release is not the controlling property. If the cloth moves into a cleaner zone, the same construction can usually be supplied with a sealed border.
Can the W6120 be supplied as an OEM or private-label product?
Yes. Sizes, folds, GSM, edge, colour and packaging can be customised; the minimum order is negotiable by construction and the lead time is 3–5 days stock · 7–15 days custom. Send the format and the packaging brief and we will quote against the construction rather than the carton.