Featured reference W6111 SMT Stencil Wiping Rolls
Product codeW6111Made in Shenzhen
W6111 is the DEK-compatible roll: 510 mm wide, 10 m long, 20 mm core, two notches at each end.
- Stock lines ship in 3–5 days; custom runs in 7–15 days.
- COA, SDS and lot test records supplied with the shipment.
- OEM sizes, folds, edges and private-label packaging available.
Need a specification match? Talk to a product specialist or call +86-755-8961-6773.
Overview
W6111 is the DEK-compatible roll: 510 mm wide, 10 m long, 20 mm core, two notches at each end. The 56 GSM cellulose/polyester spunlace is perforated for consistent feed and low lint on the stencil.
Specify the roll by printer model, not by width alone. The core, notch and rib pattern decide whether the roll feeds correctly.
Construction & performance
- Printer-specific core, notches and ribs
- 56 GSM 55% cellulose / 45% polyester spunlace
- Low lint and low dust on the stencil
- Perforated roll for consistent feed
Customization & sampling
Custom core dimensions, notches, ribs and roll lengths are available. Send the printer model and the current roll code; we will confirm fit and send a sample roll.
Series data
| Product code | W6111 |
|---|---|
| Series | SMT Stencil Wiping Rolls |
| Base material | Cellulose / polyester |
| Cleanroom class | Electronics · ISO Class 5–7 |
| Edge finish | Cut edge |
| Format | 510 mm × 10 m roll · 20 mm core |
| Color | White |
| Packaging | 15 rolls/box |
| Certifications | ISO 9001 · ISO 14001 · SGS · RoHS |
| MOQ | Negotiable by construction |
| Lead time | 3–5 days stock · 7–15 days custom |
Range specification shown for orientation. The final configuration — weight, texture, size, edge and packaging — is confirmed on the product data sheet before production.
Construction notes
Polyester is the workhorse of cleanroom wiping: low particle release, good solvent resistance and enough strength to survive a folded, repeated pass. It wets out more slowly than cellulose but holds what it takes.
Performance depends on the edge and the wash. A sealed border removes the largest fiber source; a washed, low-NVR grade keeps residue off critical surfaces. Both are specified on the data sheet rather than assumed from the fiber name.
Typical applications
- DEK stencil printers
- Stencil underside cleaning
- Squeegee wipe-down
- PCB support cleaning
- DEK / SONY / MPM printers
- SMT tool maintenance
Documentation
Looking for the catalogue entry or to place an order? See W6111 SMT Stencil Wiping Rolls on the official WIPESTAR catalogue . This page documents material, ISO class and edge options for specifiers.
Questions buyers ask
What is the W6111 used for?
W6111 SMT Stencil Wiping Rolls is specified for surface wiping and similar work. It is a Cellulose / polyester construction with a cut edge edge, supplied 15 rolls/box. Confirm the format against your surface and solvent before the first order.
Does the W6111 suit an ISO Class 5 cleanroom?
The range is rated Electronics · ISO Class 5–7. The class on the data sheet refers to the wiper, not to the room: the room classification, the gowning and the wiping technique decide whether the cloth can be used there. For a critical zone, ask for the lot particle and NVR data for this grade.
Is the W6111 edge cut or sealed?
The edge is cut, which is the economical choice where the soil load dominates and particle release is not the controlling property. If the cloth moves into a cleaner zone, the same construction can usually be supplied with a sealed border.
Can the W6111 be supplied as an OEM or private-label product?
Yes. Sizes, folds, GSM, edge, colour and packaging can be customised; the minimum order is negotiable by construction and the lead time is 3–5 days stock · 7–15 days custom. Send the format and the packaging brief and we will quote against the construction rather than the carton.