ISO 9001 · ISO 14001 · NEBB Class 4–6 cleanrooms

White wiper samples, a steel ruler and a specification sheet on a warm workbench

The specifier's library

Everything behind a good wipe specification.

Materials, ISO classes, edge sealing, industry applications, OEM and sampling. Six reference pages written for the people who have to defend the choice — not for a catalogue.

6 guides Updated November 2026 WIPESTAR Technical Team

01 — The path

A three-step specification path

The order matters. The surface and the soil decide the material; the class decides the edge; the trial decides the format.

  1. 01

    Define the job

    Surface, soil and solvent. Write it down before you look at a catalogue.

  2. 02

    Set the class and edge

    ISO class decides the edge and the documentation; the soil decides the fiber.

  3. 03

    Sample two formats

    Run a side-by-side trial on the real surface, then quote the format that wins.

02 — The short version

Match the material to the soil

Six starting points. Confirm the edge, the format and the lot data before the first pallet.

Oil and coolant
Wood pulp/polypropylene X6–X8, or meltblown PP for heavy spills.
Paint & coating prep
High-friction cellulose/polyester, then an ultrasoft finish wipe.
ISO Class 3–6
Laser or ultrasonic sealed polyester/microfiber with lot LPC/NVR data.
ISO Class 7–8
Cellulose/polyester or a sealed microfiber; cut edge where the soil load dominates.
Optics & displays
Soft rayon/polyester or fine microfiber, damp with the approved solvent.
SMT stencil
Printer-specific roll by core and notch, 56 GSM cellulose/polyester.

Still reading?

Send the surface. We'll send the shortlist.

Ask a specification engineer
客服头像
Connecting...
Before we start, please tell us your name
Before we start, please tell us your name
Talk to us directly info@wipestar.com +86-755-8961-6773 Full contact form →
Support typing