Featured
W3501 Heavy Duty Surface Preparation Wipes (High Friction)
W3501 is a high-friction surface preparation wipe: a cellulose / polyester sheet cut to 30 × 35 cm and treated to rais...
The collection
High-friction, ultrasoft and mesh wipes for paint prep, coating, bonding and adhesive removal. Low-residue cleaning before the finish.
Also explore Wiping papers Disposable wood-pulp papers when a cloth is more than the job needs.
Featured
W3501 is a high-friction surface preparation wipe: a cellulose / polyester sheet cut to 30 × 35 cm and treated to rais...
W3104 is a white microfiber surface-preparation wipe cut to 30 × 30 cm. The cloth absorbs solvent and water-based soil...
W3102 is a blue microfiber surface-preparation wipe cut to 30 × 30 cm. The cloth absorbs solvent and water-based soils...
W3301 uses an open mesh to get under adhesive, tape residue and sealant squeeze-out. The 25 × 40 cm mesh lifts the glu...
W3401 is the soft option in the surface-prep range: a rayon / polyester spunlace cut to 25 × 30 cm. It cleans optical ...
Specifying surface preparation wipes
A wipe that cleans a bench is not necessarily a wipe that prepares a panel for paint. Surface preparation has to remove wax, oil, fingerprints and dust without leaving a residue or a scratch.
The high-friction cellulose/polyester wipe mechanically lifts overspray and wax. It is the first pass before a tack cloth or a soft finish wipe, not a replacement for either.
Rayon/polyester and microfiber are for lenses, displays, mold faces and instrument surfaces. The cloth must be soft enough that the cleaning action does not become the defect.
An open mesh gets under label glue and sealant squeeze-out and lifts it. A smooth cloth tends to smear the adhesive across a wider area.
Selection notes
Four questions that decide whether the cloth belongs in the room.
Cut edges are economical for industrial wipe-downs and ISO Class 7–8 support areas. Laser, ultrasonic or heat-sealed edges lock the fibers in and are the correct choice for ISO Class 3–6, optics, medical devices and any surface where a stray fiber becomes a defect.
Grams per square meter describes the fabric weight, which drives absorbency, wet strength and hand feel. A 65 GSM rayon/polyester is soft and precise; a 140–200 GSM polyester holds more liquid and survives repeat use. GSM is a starting point — construction and edge finish decide the rest.
Yes. Stock lines can be combined across sizes and formats, and custom runs can include more than one SKU. MOQ is negotiated per construction rather than per carton.
Both. Cleanroom wipers are converted and bagged in ISO Class 4–6 workshops with particle, NVR and ionic data. Universal and heavy-duty cloths are built for industrial soil load, where absorbency and wet strength matter more than particle counts.
Specification support
Send the surface, the contaminant and the cleanroom class. We will shortlist two formats, send samples and quote both.
Direct line
+86-755-8961-6773 info@wipestar.comRoom 101, Building 1, Angeer Factory, No.4 Hetian Road, Shatian Community, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China 518122