Frequently asked questions
Wiping Cloth & Wiping Paper FAQs
The questions specifiers and buyers ask before the first sample — materials, ISO classes, edges, formats, OEM and shipping. If your question is not here, send it and we will answer directly.
Choosing the material
A wiping cloth is a reusable nonwoven or knitted fabric — wood pulp/polypropylene, polyester, microfiber or cellulose blends — built to survive multiple passes and solvents. A wiping paper is a single-use 100% wood-pulp sheet that is softer and more absorbent for the price, but with lower wet strength. Use cloths for repeat work and controlled cleaning; use papers where a fresh, disposable sheet matters more than reuse.
Meltblown polypropylene has the highest oil capacity per gram because of its high-loft fiber structure. Wood pulp/polypropylene is the economical choice for coolant and light oil; cellulose/polyester is better for water-based soil and general degreasing.
No. Microfiber traps fine particles in the fiber and is softer on scratch-sensitive surfaces, but a continuous-filament polyester knit can have lower NVR and better solvent resistance for a critical tool surface. Match the construction to the soil and the audit requirement.
Grams per square metre is the fabric weight. It drives absorbency, wet strength and hand feel, but it does not tell you the blend, the edge or the particle performance. Use GSM as one specification, not the specification.
Cleanroom & ISO class
Only in lower-class support areas where the particle risk is controlled. For ISO Class 3–6 critical surfaces, use a laser, ultrasonic or heat-sealed edge and ask for lot particle data.
ISO Class 3–5 calls for a sealed-edge polyester or microfiber wiper with documented particle, NVR and ionic data. ISO Class 6–8 can often use a cut-edge cellulose or mesh wipe where the soil load is the main problem. If the room is classified, ask for the lot report before the sample.
Non-volatile residue is what remains on a surface after a solvent has evaporated. For semiconductor and optics work, a wipe that leaves NVR defeats the cleaning. Polyester and microfiber are chosen for low NVR; ask for the test method when the surface is solvent-sensitive.
Edge, format & sizing
All three lock the fibers in to reduce shedding. Laser sealing is clean and precise for single-layer fabrics. Ultrasonic works well on blended nonwovens. Heat sealing is the economical option for higher volumes. The right choice is the one your supplier can support with repeatable particle data.
4-inch and 6-inch formats suit tight assemblies and tool wipe-down; 9-inch covers benches and small areas; 12-inch and larger handle panels and broad surfaces. Order the smallest size that covers the job to reduce waste and cost per wipe.
Flat sheets are economical for bench use. Interfold dispensing is faster in a production line because one pull delivers one wipe. Perforated rolls suit automated cleaning and stations that dispense by length. Match the format to how the operator actually works, not to the cheapest carton.
Buying, OEM & samples
MOQ is negotiated per construction and format rather than per carton. Stock lines can be combined across sizes and formats; custom runs may include more than one SKU. Send your expected volume and we will confirm the practical MOQ.
Yes. We ship evaluation samples before the first order so you can test absorbency, lint and edge behaviour on your actual surface and solvent. Request samples with your application and cleanroom class.
Yes. We build custom blends, sizes, folds, edges, colours and packaging in one site. From a brief to a pallet, the sample you approve is the product that ships. See the OEM and private label page for the full process.
Production is ISO 9001 and ISO 14001 certified, with SGS and RoHS testing available. Cleanroom wipers are converted and bagged in ISO Class 4–6 workshops with particle, NVR and ionic data by lot.
Shipping & support
We ship to more than 50 countries by air and sea, with export documentation and logistics coordinated by our foreign trade team. Lead times are 3–5 days for stock and 7–15 days for custom runs.
Send the surface, the contaminant and the cleanroom class. A product specialist will shortlist two formats with the data sheet and the trade-offs stated plainly — then ship samples so you can verify on your own line.
