ISO 9001 · ISO 14001 · NEBB Class 4–6 cleanrooms

Surface Preparation Wipes

W3501 Heavy Duty Surface Preparation Wipes (High Friction)

Product codeW3501Made in Shenzhen

W3501 is a high-friction surface preparation wipe: a cellulose / polyester sheet cut to 30 × 35 cm and treated to raise mechanical bite.

MaterialCellulose / polyester
Cleanroom classControlled areas · ISO Class 7–8
Edge finishCut edge
Format30 × 35 cm
  • Stock lines ship in 3–5 days; custom runs in 7–15 days.
  • COA, SDS and lot test records supplied with the shipment.
  • OEM sizes, folds, edges and private-label packaging available.

Need a specification match? Talk to a product specialist or call +86-755-8961-6773.

Overview

W3501 is a high-friction surface preparation wipe: a cellulose / polyester sheet cut to 30 × 35 cm and treated to raise mechanical bite. It lifts wax, oil and overspray before coating instead of pushing them into the panel.

Use it before paint, coating or bonding when the surface has to be mechanically cleaned. It is not a finish wipe; follow with a soft cloth if the coating is sensitive.

Construction & performance

  • High-friction surface lifts wax, oil and overspray
  • Thick, soft hand feel for control on panels
  • Absorbs solvent and water-based contaminants
  • Cut edge; flat pack for paint booths

Customization & sampling

Custom friction levels, sizes and colors are available. Tell us the substrate and the coating; we will shortlist the surface and send a sample for trial.

Series data

Product codeW3501
SeriesSurface Preparation Wipes
Base materialCellulose / polyester
Cleanroom classControlled areas · ISO Class 7–8
Edge finishCut edge
Format30 × 35 cm
ColorWhite
PackagingFlat pack · per SKU
CertificationsISO 9001 · ISO 14001 · SGS · RoHS
MOQNegotiable by construction
Lead time3–5 days stock · 7–15 days custom

Range specification shown for orientation. The final configuration — weight, texture, size, edge and packaging — is confirmed on the product data sheet before production.

Construction notes

Polyester is the workhorse of cleanroom wiping: low particle release, good solvent resistance and enough strength to survive a folded, repeated pass. It wets out more slowly than cellulose but holds what it takes.

Performance depends on the edge and the wash. A sealed border removes the largest fiber source; a washed, low-NVR grade keeps residue off critical surfaces. Both are specified on the data sheet rather than assumed from the fiber name.

Typical applications

  • Automotive paint prep
  • Composite bonding prep
  • Paint and coating preparation
  • Adhesive and tape residue
  • Composite bonding
  • Optical and display surfaces

Documentation

Technical data sheetOn request
Safety data sheet (SDS)On request
Certificate of analysisPer lot
Sterility assurance letterSterile lines

Looking for the catalogue entry or to place an order? See W3501 Heavy Duty Surface Preparation Wipes (High Friction) on the official WIPESTAR catalogue . This page documents material, ISO class and edge options for specifiers.

Questions buyers ask

What is the W3501 used for?

W3501 Heavy Duty Surface Preparation Wipes (High Friction) is specified for surface wiping and similar work. It is a Cellulose / polyester construction with a cut edge edge, supplied flat pack · per sku. Confirm the format against your surface and solvent before the first order.

Does the W3501 suit an ISO Class 7 cleanroom?

The range is rated Controlled areas · ISO Class 7–8. The class on the data sheet refers to the wiper, not to the room: the room classification, the gowning and the wiping technique decide whether the cloth can be used there. For a critical zone, ask for the lot particle and NVR data for this grade.

Is the W3501 edge cut or sealed?

The edge is cut, which is the economical choice where the soil load dominates and particle release is not the controlling property. If the cloth moves into a cleaner zone, the same construction can usually be supplied with a sealed border.

Can the W3501 be supplied as an OEM or private-label product?

Yes. Sizes, folds, GSM, edge, colour and packaging can be customised; the minimum order is negotiable by construction and the lead time is 3–5 days stock · 7–15 days custom. Send the format and the packaging brief and we will quote against the construction rather than the carton.

Need a disposable option? Explore Wiping Papers Delicate, Standard and Efficient wood-pulp papers. Browse
客服头像
Connecting...
👋
Before we start, please tell us your name
Talk to us directly info@wipestar.com +86-755-8961-6773 Full contact form →
Support typing