Industry application
Wiping Cloths for Aerospace & Rail Manufacturing
In aerospace and rail, a wipe has to remove contamination without leaving a fiber, a residue or a foreign object that later becomes an FOD finding.
Composite bonding, avionics assembly, interior finishing and maintenance all depend on a surface that is chemically clean. The wipe is part of the bond preparation, not an afterthought.
The specification is driven by the material system: epoxy, primer, sealant or coating. A solvent that is compatible with one system can leave a residue that blocks adhesion in another. The cloth has to be low-lint and compatible with the validated solvent.
01 Where the risk sits
Release residue at the bond line
A wipe that leaves oil, mold release or fiber at the bond line causes adhesive failure that may not show until structural testing.
FOD from cut edges
Loose fibers become foreign object debris in an assembly or a cabin. Sealed edges and controlled dispensing reduce the risk.
Solvent compatibility
A cloth that softens in the solvent leaves a residue and a mess. Confirm compatibility before the team standardises.
02 Specification
- Material
- Polyester knit, microfiber, high-friction cellulose/polyester
- Edge
- Laser or ultrasonic sealed for bond areas
- Cleanroom class
- ISO Class 6–8 or controlled assembly area
- Format
- 9 × 9 in, 12 × 12 in, rolls for long panels
03 Recommended wipes
04 Cleaning protocol
Confirm the solvent
Use the solvent approved for the material system. Test a small area if the combination is new.
Wipe in one direction
Work from the bond line outward. Do not drag contamination back into the prepared area.
Change at the edge
Replace the cloth when it reaches the edge. A loaded cloth transfers soil to the next panel.
Respect the open time
Bond within the adhesive open time after cleaning. The wipe does not extend the window.
Control the waste
Bag used wipes and keep them out of the FOD stream. A loose wipe in a cabin or a bay is a finding.
05 Frequently asked questions
A sealed-edge polyester or microfiber wipe with the approved solvent is the usual starting point. Confirm NVR and compatibility with the adhesive system.
Yes. Polyester and microfiber wipes with sealed edges are available in flat packs and rolls. Tell us the surface and the cleaning agent.
Yes. Cleanroom grades carry lot-level records; industrial grades carry batch records on request.
Start with a sample



