WS3301 Sub Microfiber Cleanroom Wipers
Product codeWS3301Made in Shenzhen
WS3301 is a single-knit submicrofiber polyester wiper, with a laser-sealed edge.
- Stock lines ship in 3–5 days; custom runs in 7–15 days.
- COA, SDS and lot test records supplied with the shipment.
- OEM sizes, folds, edges and private-label packaging available.
Need a specification match? Talk to a product specialist or call +86-755-8961-6773.
Overview
WS3301 is a single-knit submicrofiber polyester wiper, with a laser-sealed edge. The very fine fiber gives a soft hand and high particle pickup without the lint of a cut-edge cloth.
Specify it where the surface is critical and the audit expects low particle, NVR and ionic data. It is the correct tier for ISO Class 3–7 rather than a general industrial cloth.
Construction & performance
- Ultrafine fibers trap particles inside the cloth
- Soft surface for scratch-sensitive optics and displays
- Sealed edge to lock fibers in during the wipe
- Cleanroom bagged before it leaves the converting room
Customization & sampling
Custom sizes, edge styles, cleanroom bagging and sterile options are available. Send the ISO class and the surface; we will confirm the construction and provide samples before production.
Series data
| Product code | WS3301 |
|---|---|
| Series | Cleanroom Wipers |
| Base material | Polyester |
| Cleanroom class | ISO Class 3–7 (sealed edge) |
| Edge finish | Laser-sealed |
| Format | 23 × 23 cm (9 × 9 in) |
| Color | White |
| Packaging | Cleanroom bagged · 100 pcs/bag (per SKU) |
| Certifications | ISO 9001 · ISO 14001 · SGS · RoHS |
| MOQ | Negotiable by construction |
| Lead time | 3–5 days stock · 7–15 days custom |
Range specification shown for orientation. The final configuration — weight, texture, size, edge and packaging — is confirmed on the product data sheet before production.
Construction notes
Microfiber splits each filament into wedges that trap soil mechanically rather than only absorbing it. That is why it lifts oils and fine particulate from a surface that a flat fiber leaves behind.
The advantage disappears if the cloth is used dry on a sensitive finish or washed with fabric softener. Microfiber needs a defined solvent, a defined pass count and a defined laundering route to keep its performance.
Typical applications
- Wafer and tool wipe-down
- Isolator and RABS cleaning
- Filling line surfaces
- Optics and display panels
- Medical device assembly
Documentation
Looking for the catalogue entry or to place an order? See WS3301 Sub Microfiber Cleanroom Wipers on the official WIPESTAR catalogue . This page documents material, ISO class and edge options for specifiers.
Questions buyers ask
What is the WS3301 used for?
WS3301 Sub Microfiber Cleanroom Wipers is specified for surface wiping and similar work. It is a Polyester construction with a laser-sealed edge, supplied cleanroom bagged · 100 pcs/bag (per sku). Confirm the format against your surface and solvent before the first order.
Does the WS3301 suit an ISO Class 3 cleanroom?
The range is rated ISO Class 3–7 (sealed edge). The class on the data sheet refers to the wiper, not to the room: the room classification, the gowning and the wiping technique decide whether the cloth can be used there. For a critical zone, ask for the lot particle and NVR data for this grade.
Is the WS3301 edge cut or sealed?
The edge is sealed (Laser-sealed), which closes the cut border and removes the largest single source of loose fiber. That is the correct choice for critical surfaces and for any class where particle release is measured.
Can the WS3301 be supplied as an OEM or private-label product?
Yes. Sizes, folds, GSM, edge, colour and packaging can be customised; the minimum order is negotiable by construction and the lead time is 3–5 days stock · 7–15 days custom. Send the format and the packaging brief and we will quote against the construction rather than the carton.