Industry application
Wiping Cloths for Metalworking & Maintenance
Machine shops measure a wipe in passes and pieces. The cloth has to pick up coolant, oil and metal fines without tearing, and it has to do it at a cost per task that works.
CNC machines, lathes, mills, presses and maintenance departments generate a mix of coolant, way oil, grease, metal fines and cutting fluid. The wipe has to absorb the fluid and hold the fines without smearing them back onto the ways.
The X6 and X8 universal cloths cover most of the daily work. Meltblown polypropylene oil cloths handle the heavy spills and sumps. The right combination is usually two or three products, not one cloth for everything.
01 Where the risk sits
Metal fines on sliding surfaces
A cloth that drags fines across a way or a spindle can cause wear. Lift the soil; do not scrub it into the surface.
Coolant and oil spread
A saturated cloth spreads oil instead of removing it. Change it before it reaches the smear point.
Tearing under load
A light cloth that tears in a sump leaves fiber in the oil. Use a heavier grade or a meltblown cloth for the heavy work.
02 Specification
- Material
- Wood pulp/PP X6–X8; meltblown polypropylene
- Edge
- Cut edge
- Cleanroom class
- Industrial
- Format
- 12 × 12 in, 9 × 9 in, rolls and brag boxes
03 Recommended wipes
04 Cleaning protocol
Drain the bulk first
Use an absorbent cloth or a sump pad for the pool, then finish with a wipe. A hand wipe is not a pump.
Wipe with the surface
Follow the geometry of the way or the table. A back-and-forth motion drives fines into the clearance.
Use a fresh face
Turn the cloth or replace it before the loaded side goes back over the surface.
Separate oil waste
Keep oil-soaked wipes in the designated container. A general bin is a fire and environmental risk.
Match the grade to the task
X5 for light bench work, X6/X8 for machine wipe-down, meltblown PP for heavy oil. Standardise on two or three, not one.
05 Frequently asked questions
X6 or X8 universal cloths are the daily choice. For a heavy sump or a large spill, use a meltblown polypropylene oil cloth.
Yes. Heavy-duty meltblown PP can be washed and reused until the fiber structure collapses.
Yes. Brag boxes, flat packs and rolls are available. Tell us how the team pulls the wipe.
Start with a sample



