ISO 9001 · ISO 14001 · NEBB Class 4–6 cleanrooms

Industry application

Cleanroom Wipers for Biopharma & Medical Devices

In a GMP facility, the cleaning tool is part of the contamination control strategy. The wiper has to be low-particle, low-residue and documented — and in Grade A/B, sterile.

Material Cellulose/polyester, nonwoven microfiber, polyester knit Edge Cut edge for support areas; sealed edge for critical surfaces Class ISO Class 5–8; sterile formats for Grade A/B
Sterile wiping paper and wipes beside lab glassware in a pharmaceutical cleanroom

Biopharma cleaning spans several very different zones: gowning, compounding, filling, isolators and RABS, equipment preparation and environmental monitoring. The wiper that suits a D-grade corridor is not the wiper that goes into an isolator.

The specification is driven by the cleaning validation, not by a catalogue. Material, edge, bioburden and sterility all have to match the SOP. A low-particle cloth that is not sterile cannot substitute for a sterile wipe in a Grade A zone, even if the particle count is lower.

01 Where the risk sits

Bioburden and endotoxin

A non-sterile wipe carries its own microbial load. In Grade A/B, the wipe must be sterile and handled through a validated transfer process.

Fiber and particle residue

Fiber shed becomes visible under light and shows up in environmental monitoring. Sealed edges and low-LPC constructions reduce the load.

Cleaning agent residue

The wipe has to release the cleaning agent without leaving NVR or ionic residue. Rinse and wipe steps need to be validated together.

02 Specification

Material
Cellulose/polyester, nonwoven microfiber, polyester knit
Edge
Cut edge for support areas; sealed edge for critical surfaces
Cleanroom class
ISO Class 5–8; sterile formats for Grade A/B
Format
9 × 9 in flat pack, 12 × 12 in, perforated rolls

03 Recommended wipes

04 Cleaning protocol

01

Follow the validated SOP

Use the wipe, the agent and the sequence in the cleaning validation. Substituting a cloth without revalidation is a change control issue.

02

Transfer without contamination

Double-bag or bag-in-bag transfers keep the outer surface clean. Wipe the bag before it enters the zone.

03

Unidirectional, overlapping passes

Work from clean to dirty with overlapping strokes. Turn or replace the cloth before the loaded face goes back over the surface.

04

Respect the dwell time

The wipe does not replace the contact time of the cleaning agent. Let the agent work, then wipe.

05

Record the lot

Tie the wipe lot to the cleaning record. If an excursion happens, the lot file is the first thing the auditor asks for.

05 Frequently asked questions

Sterile, gamma-irradiated wipers are available through the OEM program. Share the zone, the sterility assurance requirement and the packaging format; we will confirm the configuration.

Start with a sample

Two wipes, one surface, a measurable difference.

Request an application sample
客服头像
Connecting...
Before we start, please tell us your name
Before we start, please tell us your name
Talk to us directly info@wipestar.com +86-755-8961-6773 Full contact form →
Support typing